We all know that the development of sheet metal processing has been step by step steadily, with professional processing technology and processing techniques. For our doors and windows, none of our various boxes and auto parts do not require sheet metal processing. So in the processing process, which parts the technicians should pay attention to, let's share them together today.
Pay attention to one: bending
Bending refers to the process of forming a workpiece by a bending machine. Any part has a certain angle or radian. If the angle radian is accurate, it will not match other parts, which will lead to redoing or waste of materials. Every angle cannot be ignored. For example, some products require a 90-degree angle to match it. If the angle is larger or smaller during the bending process, it will not work. This must be accurate.
Pay attention to two: component length and size
The length and size of the parts are also very important. As the saying goes, a radish is a hole, and only suitable is the most important. If the parts are large during processing, they will not fit, and if they are small, they will not be combined.
Pay attention to three: shape
In this part of sheet metal processing customization, shape is very important. General technicians process them through the drawings provided by the customers. What kind of design drawings are they should be processed according to the customer's requirements. Otherwise, why is it called customization? Therefore, technicians should not add too much of their own thoughts. If they must change something, they must communicate well with the customer before the change, and wait until the customer confirms it before designing.
The processing steps of sheet metal processing parts are: product preliminary test, product processing trial production and product batch production. During the trial production steps of product processing, it is necessary to communicate with customers in a timely manner, and after obtaining the evaluation of the corresponding processing, proceed to mass production of the product. Only the above 3 points can be regarded as a qualified processing place and processing technician.